Descripción del Producto

1. 

   Código de producto	CRS125-24G-1S-RM
   SFP DDMI	Sí
   CPU frecuencia nominal	600 MHz
   CPU número de núcleos	1
   Arquitectura	MIPS-BE
   Tamaño de RAM	128 MB
   Puertos Ethernet 10/100/1000	24
   Número de puertos USB	1
   Conector de alimentación	1
   PoE	Sí
   voltaje de entrada el apoyo	8 V - 28 V
   monitor de Voltaje	Sí
   vigilancia de la temperatura de PCB	Sí
   Dimensiones	443x142x44mm
   Sistema operativo	RouterOS
   Rango de temperatura de funcionamiento	-35C A + 65C a prueba
   nivel de licencia	5
   UPC	AR9344
   Consumo máximo de energía	15W
   Los puertos SFP	1
   Tipo de ranura USB	microUSB tipo AB
   Puerto serial	RJ45
   tipo de almacenamiento	NAND
   El tamaño de almacenamiento	128 MB

   Switching results

   CRS125-24G-1S-RM
   Mode	Configuration	64 byte		512 byte		1518 byte
   		kpps	Mbps	kpps	Mbps	kpps	Mbps
   Switching	Non blocking Layer 2 throughput	37,202.4	19,047.6	5,874.1	24,060.2	2,031.9	24,674.9
   Switching	Non blocking Layer 2 capacity	37,202.4	38,095.2	5,874.1	48,120.3	2,031.9	49,349.8
   Switching	Non blocking Layer 1 throughput	37,202.4	25,000.0	5,874.1	25,000.0	2,031.9	25,000.0
   Switching	Non blocking Layer 1 capacity	37,202.4	50,000.0	5,874.1	50,000.0	2,031.9	50,000.0

   Ethernet test results

   CRS125-24G-1S-RM		AR9344 1G all port test
   Mode	Configuration	1518 byte		512 byte		64 byte
   		kpps	Mbps	kpps	Mbps	kpps	Mbps
   Bridging	none (fast path)	81.0	983.7	232.0	950.3	269.6	138.0
   Bridging	25 bridge filter rules	81.0	983.7	86.0	352.3	87.6	44.9
   Routing	none (fast path)	81.0	983.7	210.0	860.2	226.9	116.2
   Routing	25 simple queues	81.0	983.7	103.9	425.6	106.6	54.6
   Routing	25 ip filter rules	56.8	689.8	59.6	244.1	60.5	31.0

   1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
   2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
   3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
   4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

   

Switching results

Ethernet test results

1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results